The 4ipnet EAP700 Wall Jack Access Point is an in-the-wall Wi-Fi IEEE 802.11b/g AP, designed to blend with any office or home interior architecture or furnishings effortlessly.

The compact EAP700 in a small form factor lays snug in a standard wall outlet box, and hides the wall cutout with its faceplate. Its front panel features LED status indicators and a RJ45 wall jack. It has the interfaces to serve both wireless and wired LAN access. The simplistic yet chic design of EAP700 allows it to blend into a working or a living environment practically and elegantly.

Wireless and Wired Interface Standard

• IEEE 802.11g (up to 54Mbps), IEEE 802.11b (up to 11Mbps), Atheros™ Super G (up to 108Mbps)
• Ethernet: IEEE 802.3 and IEEE 802.3u

Wireless Radio

• Frequency band: 2.4 GHz
• Wireless architecture: AP mode, Repeater mode (WDS / Universal Repeater)
• Modulation: 802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK), 802.11b: DSSS (CCK, DBPSK, DQPSK)
• Data rate with auto fallback: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, and 1 Mbps
• Receiver Sensitivity: 802.11g: 54Mbps@-74dBm, 802.11b: 11Mbps@-89dBm
• RF output power: 100mW EIRP

QoS & WMM

• DiffServ / TOS, IEEE 802.1p/ COS, IEEE 802.1Q Tag VLAN priority controlg, IEEE 802.11e WMM

Handover & Roaming

• IEEE 802.11f IAPP
• IEEE 802.11i pre-auth (PMKSA cache)
• L2 Roaming

System Management

• Web-based administration
• SNMP v1/v2c
• Syslog information support
• Capable of performing RADIUS Accounting and Accounting Update

Security

• EAP-TLS + Dynamic WEP), EAP-TTLS + Dynamic WEP, PEAP / MS-PEAP + Dynamic WEP
• WPA (PSK + TKIP), WPA (802.1X certification + TKIP), WEP (64/128/152 bits)
• 802.11i WPA2 (PSK + CCMP / AES), 802.11i WPA2 (802.1X certification + CCMP / AES)
• Hidden ESSID support
• MAC Address filtering (MAC ACL), MAC authentication with RADIUS servers
• Maximum number of registered RADIUS servers: 2

Built-in Servers & Client Interfaces to Other Services

• Syslog client
• RADIUS client
• SNMP v1/v2c client

Wireless Signal Management

• Number of ESSIDs (Virtual APs): 8
• Number of associated clients per AP: 32
• Setting for maximum number of associated clients
• Network policy based on ESSID

Connectors and Display

• LAN Port: 1 × 10/100 Base-T Ethernet
• PoE Port: 1 × 10/100 Base-T Ethernet

Note. No PSU shipped with product. Requires PoE injector or PoE Ethernet switch