Performance Standards Compliance IEEE 802.1D Spanning Tree Protocol and traffic priorities IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1p Priority tags IEEE 802.1Q VLAN IEEE 802.1v Protocol-based VLANs IEEE 802.1x Port Authentication IEEE 802.3-2005 Ethernet, Fast Ethernet, Gigabit Ethernet Full-Duplex flow control Link Aggregation Control Protocol IEEE 802.3ac VLAN tagging Switch Capability 24 Fast Ethernet ports with non-blocking wire speed performance 8K MAC address entries with auto-learning function Packet Buffer: 1Mbits Jumbo frame up to 10k Network Interface 24x RJ-45 10/100BASE-TX ports 4x Gigabit RJ-45/SFP (Mini-GBIC) shared ports Software Layer 2 Features Auto-negotiation for port speed and duplex mode Flow Control: IEEE 802.3x for full-duplex mode Back-Pressure for half-duplex mode Spanning Tree Protocol: IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Back Detection BPDU Guard BPDU Filter Root Guard Auto Edge VLANs: Supports 255 IEEE 802.1Q VLANs Port-based VLANs IEEE 802.1v Protocol-based VLANs Private VLAN GVRP Link Aggregation: Static Trunk IEEE 802.3ad Link Aggregation Control Protocol Trunk groups: 4, Trunk links: 2~8 IGMP Snooping: IGMP v1/v2/v3* snooping IGMP Queried IGMP Filtering MVR (Multicast VLAN Registration) DHCP Option 82 DHCP Dynamic provision Supports jumbo frames up to 10KB QoS Priority Queues: 4 hardware queues per port Traffic classification based on IEEE 802.1p CoS, IP and DSCP Supports WRR and strict scheduling Bandwidth Control: Egress rate limiting: FE: 64Kbps ~ 100Mbps / GE: 64Kbps ~ 1000Mbps Ingress rate limiting: FE: 64Kbps ~ 100Mbps / GE: 64Kbps ~ 1000Mbps Security Supports IEEE 802.1X port based/MAC-based access control QoS Assignment RADIUS authentication IP Source Guard Dynamic ARP Inspection Link Detection MAC Filter TACACS+ 3.0 Access Control List SSH (v1.5/v2.0) SSL Management Switch Management: CLI via console port or Telnet WEB management SNMP v1, v2c, v3 Firmware & Configuration: Dual firmware images Firmware upgrade via TFTP server Multiple configuration files Configuration file: upload/download via TFTP server Auto Upgrade via TFTP server Supports RMON (groups 1, 2, 3 and 9) Supports BOOTP, DHCP for IP address assignment Supports SNTP Event/Error Log/Syslog Dynamic ARP Inspection sFlow MAC Based Mirror ATC Delay Reload Dimensions 430mm(W) * 171mm(D) * 44mm(H) Power Supply Internal power supply: 110~240VAC, 50/60Hz
Ask a question about this product Read more about the FGL-2870